Canon BP-308 Camcorder Battery

Buy Canon BP-308 Battery

Replacement Canon BP-308 Battery ! The rechargeable Canon BP-308 Li-ion Battery (800mAh high capacity) is specially designed for the original Canon BP-308 camcorder battery. This store offers best price for the replacement canon battery BP-308. Full one year warranty and 30 days money back.

CANON BP-308 Battery Tips

New Canon BP-308 Battery needs charging and discharging cycle first before the regular usage. Because battery from factory to the users' hands that exists the time differences, and the electrode materials will be its passivation for the battery of the longer time difference, which is why the purchase of new batteries need to be completely filled with charging and discharging cycle three times to eliminate electrode materials passivation, to activate Canon Bp-308 battery performance, to reach maximum capacity. Meanwhile, the camcorder has the data transmission agreement end between battery and the camcorder, after the need of two or three times charged and discharged cycle, the percent of its real capacity can keep pace with the percent of content on the camcorder's screen. Cycle's steps: insert in camcorder to discharge until the shutdown, and then recharge the battery, charging time must be over 12 hours, to repeat the action of charging and discharging for three times.

The proper use of camcorder battery usually will be very crucial. Discharge can not fully take end, there are about 5 percent of electricity charging, we should not be spent replenishment. Otherwise, it will accelerate the aging batteries scrapped. If the relatively high Canon Bp-308 battery capacity (such as more than 80 percent) under the charge of the case, will accelerate the aging of Canon Bp-308 battery. Use lithium ion batteries in 25 to 35 degrees centigrade, will show better performance. The low temperature or high temperature than the above state, its performance will be greatly devalued.

When using the Canon Bp-308 camcorder battery, fever is a normal phenomenon, because in the process of the Canon Bp-308 battery charged and discharged, energy conversion will result in heat and at the same time the amount of heat will be transmitted to the battery. But if overheated (burning), stop using it immediately and ask for the professinonals to check.

When not using it, charge it to about 50 percent's energy and take out of it from equipment and stored in temperature :10-20 degrees centigrade, humidity :45-75 percent. Do this each day and more than one charge, and discharge cycles to eliminate passivation of electrode materials, and activate battery performance.

Prevent the liquid entering into the replacement Canon BP-308 battery. Once liquid immersing into batteries, stop using it, dry with a dry cloth and put it in the ventilation to dry, otherwise they will result in danger.

Don't let the Canon BP-308 camcorder battery near the fire source, not subject to any pressure, otherwise they will lead to danger.

If the replacement battery for Canon BP-308 charged and discharged after three complete cycle, performance or significance still decline indicate that you should change the battery.